2″ Pipe Base



The 2-inch pipe base is compatible with 2-in inside diameter (ID) and approximately 2.5-inch outside diameter (OD) pipes. The dock hardware base should be used when the lake or river bottom is soft or muddy.

The pipe leg base will prevent the pipe from sinking too far into the lake or river bottom and will eliminate much of the side to side motion and sway one might experience when standing on the dock.

To install, drive the pipe base into the lake bottom until the base comes in contact with the lake bottom.

The base should be paired with 2” pipe side brackets that secure the pipe legs to the dock.

Additional information

Weight 1.5 lbs
Dimensions 11 × 11 × 2 in